i finally got around to setting up the timer with the easy to follow instructions, but it didnt come on this morning; i turned on the machine manually as always
i do have the timer switch set to on; i noticed that during the time when it was supposed to be on, there was a line below the time indicating the time when it was supposed to shut off (of followed by the time i had set), but it didnt shut off either
do you also need to unplug the machine and then plug it in after programming the timer to get the timer to work
any thoughts
timer set up
- chas
- Vivaldi Dreamer
- Posts: 3045
- Joined: Wed Jun 02, 2004 11:52 pm
- Location: Central Maryland
- Contact:
Re: timer set up
If you just installed the timer and flipped the timer switch ON on the control box, you probably need to unplug and plug back it to sense the switch position change. However, you don't have to cycle power every time you reprogram a new ON/OFF time.
You may want to check this thread:
viewtopic.php?f=21&t=1147&p=14210&hilit=timer#p14210
You may want to check this thread:
viewtopic.php?f=21&t=1147&p=14210&hilit=timer#p14210
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Re: timer set up
thanks
tried the plug unplug last night before bed and there it was on in the morning
tried the plug unplug last night before bed and there it was on in the morning