How Much Teflon Tape To Use?

This forum contains various threads with photos on how to perform various maintenance and repairs on your S1.
Post Reply
JerDGold
Latte
Posts: 16
Joined: Thu Dec 11, 2014 11:19 pm

How Much Teflon Tape To Use?

Post by JerDGold »

Just replaced my steam boiler. Glad to find out a dead heating element was the issue.

However, after heating, about half of my connections are leaking at where they're connected to the boiler or at the ends of my tubing. Not sure if they're either

A) Just not tight enough or...
B) I didn't use enough teflon tape. I wrapped everything about twice, but maybe it should be thicker? I'm going to try and make everything tighter once it cools back down, but how much tape should I use?
User avatar
chas
Vivaldi Dreamer
Posts: 3050
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: How Much Teflon Tape To Use?

Post by chas »

I would think 2 wraps should do it. Trying tightening the nuts first. If that doesn't work try 3 wraps.
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Post Reply

Return to “Maintenance and Repair”