Reg barber tamper

Post by **PatRi** » Thu Aug 25, 2005 12:56 pm

Hi all,
I am very happy new owner of a S1. It has been wounderful so far.

I tried to to find in the forums more info on the ideal size tamper to order from reg barber. I may have missed it

.
Has someone ordered a 53.5 mm and how does it fit? should we buy slightly bigger or smaller.

I took the Thor when I bought the S1 and not overly in love with it. Maybe I had my reg barber to long before that so it is resistance to change.
The tamping is not so bad with the thor but the polishing is not good compare to my previous reg barber.

thks, pat

Post by **padillatim** » Thu Aug 25, 2005 6:50 pm

Welcome!

I have a flat and a convex base of 53.5 each. They work well. You might be able to squeeze another .1 or .2 mm. The triple basket that i have is a tighter fit though... Tell Reg I said hi :)

Post by **PatRi** » Fri Aug 26, 2005 9:05 am

Thanks, so with the 53.5mm not to much coffee between the tamper and the side of the basket forcing to retamp? and not too tight such that the polishing does not turn well?

THKS, Pat

Post by **padillatim** » Fri Aug 26, 2005 12:21 pm

After dose & distribution, I do a light tamp, then flip the basket to clear the sides (no tap), then do a full tamp & polish. I think there will always be a little coffee that creeps between the tamper basket wall, which is why tapping has been so popular. There is room for a smooth polish with the 53.5.

TP

Post by **coffeejn** » Thu Sep 08, 2005 7:35 pm

I got the 53.5mm tamper from RegBarber but it won't fit the double basket!!! It fits perfectly the single basket though, so not a total lost. Any one know what size I should get for the double basket?

Thanks

Post by **padillatim** » Thu Sep 08, 2005 9:22 pm

I have two doubles and one triple basket (the triple is the lino'd double) and my Reg 53.5 fits all three. I double checked the single basket and the 53.5 fits it also. It may be a new style basket that is a bit smaller? Or possibly it is a manufacturing defect...

Post by **admin** » Thu Sep 08, 2005 9:30 pm

lino mentioned that between the time he made the first set of triple baskets and the second set that he got a different style basket from Chris. The first set had very vertical sides and the second set curved inward toward the bottom.

I'm guessing your double is one of these alternate basket styles.

Post by **coffeejn** » Thu Sep 08, 2005 10:31 pm

Ok so 2 choices, order another tamper, or find an older model of the double basket.....
Cheaper of the two would be a basket, any know of a location I can get one?
Or the size of the new basket....
The worst part is I have two new model of the double basket :?

Post by **padillatim** » Fri Sep 09, 2005 1:28 pm

Reg can reduce the size of the tamper base, which might be the best option (maybe you can send him a basket with the base?).

Can you post a picture of the issue? If the new baskets are thinner, before too long many of us will be having the same issue ;)

Thx

Post by **coffeejn** » Fri Sep 09, 2005 4:39 pm

This is what I have observed from both....
The single does not fit confortably in the bouble basket, however, the double basket fits perfectly, so width size on the single is wider. So in theory, the newer basket don't allow as much coffee, in THEORY.....

I'll see about getting some pic out.

I think I'll send one to RegBarber and order a tamper as well as ask the exact dimension he is sending me. It's just a hunch, but I think the new baskets are exactly 53mm.

Post by **coffeejn** » Fri Sep 09, 2005 6:11 pm

OK sent a basket to RegBarber and asked him the exact size, so some time in 2 weeks I'll know and post it here.

Post by **zak42** » Tue Sep 20, 2005 3:28 pm

coffeejn wrote:OK sent a basket to RegBarber and asked him the exact size, so some time in 2 weeks I'll know and post it here.

Any news on this ? my S1 turned up yesterday (wooHooo!), but the 53mm reg barber i have is too tight on the double basket, the 53mm espro is better, but still a little too tight for me.

Tx
Simon

Post by **hlsheppard** » Tue Sep 20, 2005 8:54 pm

I'm with you, Simon. My new S1 wouldn't fit a 53.5 mm very well.

The 53mm Espro is just about perfect!

Les at Thor doesn't seem to think that Chris would change his basket style but I beg to differ...

Either way, he's making my Thor tamper a 53 even!

Post by **coffeejn** » Fri Sep 23, 2005 5:28 pm

Still no tamper.... I did send an e-mail to Reg, and he did receive the basket, he told me he would be making it this week. I've been out all week and will be most of next week but I'll let you know the dimensions if Reg passes them to me like I requested...

My only disapointment with the S1 is the price, every thing else is good! But then in about a month or so, I won't care any more....

Post by **coffeejn** » Tue Oct 11, 2005 4:40 pm

Got the tamper today, apparantly it's a 52.5 mm tamper...... this is for the double basket.

Later.