Plumbing tip
Posted: Tue Mar 12, 2013 9:33 pm
You might have thought of this, but just in case . . .
I hesitated to purchase my S1 due to the need to plumb it. Not that I have it, of course, I am thrilled to not have to add water anymore.
Rather than drill thru our countertops (vetoed by significant other), I ran the line thru the wall just behind the countertop. I used plastic pipe to create a path for the feed line. Below the counter, where it does not show (back of the cabinet) I placed a relatively large hole to allow me to fit the plastic pipe. The meant that above the counter I could cut a precise hose using a hole saw on a drill.
Here it is. (We tiled after the hole was drilled, by the way)
I hesitated to purchase my S1 due to the need to plumb it. Not that I have it, of course, I am thrilled to not have to add water anymore.
Rather than drill thru our countertops (vetoed by significant other), I ran the line thru the wall just behind the countertop. I used plastic pipe to create a path for the feed line. Below the counter, where it does not show (back of the cabinet) I placed a relatively large hole to allow me to fit the plastic pipe. The meant that above the counter I could cut a precise hose using a hole saw on a drill.
Here it is. (We tiled after the hole was drilled, by the way)
- wall.jpg (133.19 KiB) Viewed 6064 times