S1- water box

This forum contains various threads with photos on how to perform various maintenance and repairs on your S1.
Post Reply
KuksonGarage
Freeze Dried
Posts: 3
Joined: Mon Oct 07, 2019 2:46 pm
Location: Bydgoszcz

S1- water box

Post by KuksonGarage »

Hi all,
I have noticed problem with my S1- water box.
When I make some coffee I hear strange noise and saw different water pressure, depending on how much force I use to pull water box. (While making coffee).
I replaced rubber o-ring in water box connector, and I know water pump was replaced to new one before I bought that machine.

Do You have some experience with similar problems? Where to search a problem? Maybe there is some tip to connect that water box permanently?
And load pour water from the top of machine? Or connect water from home central water pipe? (but probably some additional water filter will be needed then?)

Sometimes also I have problems with led red indicator. Even if water box is fully filled.. But it probably depends on magnet, which maybe is in bad angle.

https://www.youtube.com/watch?v=sW0G1fRbXEU&t=54s

DO You have some ideas? How to make water pressure independent on water box pushing?
User avatar
chas
Vivaldi Dreamer
Posts: 3044
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: S1- water box

Post by chas »

Read this thread:

viewtopic.php?f=57&t=1570
Chas
LM GS/3 & LaSpaziale Dream v 1.25 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B
Post Reply

Return to “Maintenance and Repair”