how difficult is it to change the grinding burrs on the mazzer mini e and are there any issues with getting them in at the correct start point; is there a resounce for this with directions; are there options available for the burrs?
one of my mini mazzer e requires a setting maybe 5 notches finer than the range marked by mazzer and i was thinking of changing the burrs; is there another adjustment that could be made instead?
how long should the original burrs last
mazzer mini e
Re: mazzer mini e
Hi Michael,
I just looked at my mini-e. I am currently set at #1 plus 5 notches. This is 6 notches finer than the left side of the sticker.
I just put new burrs in mine, and it took probably 5 pounds before it settled down. Even with that, I am about 3-4 notches finer with the new burrs.
Putting in the new burrs is not difficult, but you need to be extremely clean when you do it. It only took about 15 minutes to put them in.
-Joe
I just looked at my mini-e. I am currently set at #1 plus 5 notches. This is 6 notches finer than the left side of the sticker.
I just put new burrs in mine, and it took probably 5 pounds before it settled down. Even with that, I am about 3-4 notches finer with the new burrs.
Putting in the new burrs is not difficult, but you need to be extremely clean when you do it. It only took about 15 minutes to put them in.
-Joe
michael wrote:how difficult is it to change the grinding burrs on the mazzer mini e and are there any issues with getting them in at the correct start point; is there a resounce for this with directions; are there options available for the burrs?
one of my mini mazzer e requires a setting maybe 5 notches finer than the range marked by mazzer and i was thinking of changing the burrs; is there another adjustment that could be made instead?
how long should the original burrs last
Re: mazzer mini e
what do you mean by settled down?
how long should the burrs last before needing replacement; i have 2 mini e grinders; one grinds within the mazzer stocker band while the other has moved 5 or so notches finer; any thoughts on why that has happened
how long should the burrs last before needing replacement; i have 2 mini e grinders; one grinds within the mazzer stocker band while the other has moved 5 or so notches finer; any thoughts on why that has happened
Re: mazzer mini e
For the first few pounds the setting needed to be changed often. Over the first couple of week I moved it a couple of notches coarser, but now I rarely move it more than a notch unless I change blends.
The new burrs used completely different settings from the old ones. I have no idea why, but the grinder is working just fine now.
-Joe
The new burrs used completely different settings from the old ones. I have no idea why, but the grinder is working just fine now.
-Joe
michael wrote:what do you mean by settled down?
how long should the burrs last before needing replacement; i have 2 mini e grinders; one grinds within the mazzer stocker band while the other has moved 5 or so notches finer; any thoughts on why that has happened
Re: mazzer mini e
where did you get the burrs; did you use the ceramic burrs
Re: mazzer mini e
I got them from Chris Coffee:
http://www.chriscoffee.com/products/hom ... zzersburrs
http://www.chriscoffee.com/products/hom ... zzersburrs
michael wrote:where did you get the burrs; did you use the ceramic burrs
Re: mazzer mini e
I have a new Mazzer Super Jolly (same diameter burrs as the Mini-e). I had exactly the same experience you described for the first month.ebprod wrote:For the first few pounds the setting needed to be changed often. Over the first couple of week I moved it a couple of notches coarser, but now I rarely move it more than a notch unless I change blends.
-Joe
I think it's just a matter of "breaking in" the burrs. I believe they call it "seasoning" the grinder. Some people just get 5lbs of cheap old beans and run them through. I imagine it deburrs the sharp edges on the teeth that ar left over from the machining process (much like running a sharpened knife over a strap of leather).
Re: mazzer mini e
Probably explains why I am seeing more consistant pours/grinds/better espresso after moving the recently purchased Duranium burrs over to my vac pot SJ & grinding for espresso with the "seasoned" standard burrs. Of course I also stopped using the WDT & leveling around the same time so its hard to say which was responsible for the improvement.