Steam Tip

Did you have a bad "out-of-box" experience with your Mini? Describe it here and report back with the final resolution.
Post Reply
symbology

Steam Tip

Post by symbology »

My steam tip does not want to come off. None of my other machines ever had issues. I was able to loosen it by hand. I have used a wrench on this one and it does not want to move at all. Has anyone had this issue before?
Endo

Re: Steam Tip

Post by Endo »

Get it really hot with a good 1 minute long shot of steam. Then use the wrench (with a rag to hold it on top). It will come off.

Once off, just tighten back with fingers (nothing more).
symbology

Re: Steam Tip

Post by symbology »

Cool, so this procedure has been needed before?
symbology

Re: Steam Tip

Post by symbology »

That did the trick. I had put a wrench on it before, but was not sure how hard I needed to torque on it. I heated up the tip as recommended and got it to come off.

Thanks again.
Post Reply

Return to “Mini Day One Problems”