Preinfusion

S1 Video Forum
Post Reply
User avatar
Niko
Caffeinus Reappearus
Posts: 435
Joined: Thu Jun 05, 2008 3:30 am
Location: Sacramento, CA
Contact:

Preinfusion

Post by Niko » Sun Jul 20, 2008 8:09 pm

Here's a clip showing preinfusion set for 6 seconds @ 40psi.

http://www.youtube.com/watch?v=tTWTntowF8I

The coffee is a single farm (to be named later :D ) after I create the perfect roast profile on the Hottop.
The shot in this particular clip almost floored me and I almost didn't live to tell about it...
it was THAT GOOD.
This bean was roasted until the first audible second crack and then stopped immediately.
La Spaz VII (with timer) S5 Steam Arm & Passive Pre-Infusion, Mazzer Mini E Type B, MACAP MC4 Doserless,
MACAP Autotamper, 3 Thor tampers, Espro convex & CoffeeLabs tamper.
Scace Device, Alessi steam pitchers, Motta Steam pitcher, etc..

La Spaz S1 S5 Steam Arm w/ progressive preinfusion, Compak K3 Touch Doserless, Espro flat tamp
Hottop P, Behmor, iRoast2 and Gene Cafe

User avatar
PBL
Espresso
Posts: 52
Joined: Thu Dec 27, 2007 5:40 pm
Location: Montreal

Re: Preinfusion

Post by PBL » Tue Jul 22, 2008 8:35 pm

Nice video, seems to be very effective. The esprosso shot looks marvelous. Thanks Nilo. :D
Vivaldi S1 and my buddy Rocky

coffeeowl
Barista
Posts: 308
Joined: Fri Oct 05, 2007 3:51 pm
Location: Lodz Poland

Re: Preinfusion

Post by coffeeowl » Thu Jul 24, 2008 1:55 pm

mmm this silence after the click sounds intriguing... :) :wink: :D
Pawel

_________________
La Peppina
Arrarex Caravel
La Spaziale Vivaldi II
Mazzer Mini
KyM

___________________
'a a ha sha sa ma! Image

User avatar
JohnB
Vivaldi Dreamer
Posts: 2249
Joined: Sat Dec 29, 2007 12:01 pm
Location: Northeastern Ct.

Re: Preinfusion

Post by JohnB » Thu Jul 24, 2008 5:20 pm

coffeeowl wrote:mmm this silence after the click sounds intriguing... :) :wink: :D

Especially when no water comes out for several seconds!. I've noticed that the p/i needs to be primed by the first flush of the day. After the 1st one the water comes out immediately after the click but there is a delay of several seconds the first time. Even after a 2-3 hour idle period there will be a 2-3 second delay before you get any water on the 1st flush.
Speedster/Bosco Sorrento/ K10WBC/K30/Bunnzilla
KvdW/Pullman/RB Tampers
Hario NCA 3 & 5s/Wooden Neck Dripper/Buono
Zassenhaus Knee Mill
Modded Hottop B

User avatar
chas
Vivaldi Dreamer
Posts: 2583
Joined: Wed Jun 02, 2004 11:52 pm
Location: Central Maryland
Contact:

Re: Preinfusion

Post by chas » Thu Jul 24, 2008 5:39 pm

Since everyone should be doing one or two warming flushes anyway, this shouldn't add any extra steps.
Chas
LM GS/3 & LaSpaziale Dream v 1.19 (US 120V)
Mazzer Kony E, Customized Rocky
Hottop P/B

User avatar
boldstep
Ristretto
Posts: 91
Joined: Tue Dec 18, 2007 12:18 am
Location: Boston, MA

Re: Preinfusion

Post by boldstep » Thu Jul 24, 2008 7:46 pm

Great video Niko! Thanks for posting it.
A few questions as I start reading through all these p/i threads :read2: and jumping on the p/i bandwagon :
(1) Do you count the 6 seconds in your total extraction time? I did notice you started the timer *after* p/i finished...
(2) When you use 40 psi, I would assume that your group head pressure is also a effected, right? Or are you adjusting those independently somehow?
(3) Have you played around with different line pressures and found 40psi to be the tastiest?

Dan Bollinger
Macchiatto
Posts: 45
Joined: Sun Sep 23, 2012 10:15 am

Re: Preinfusion

Post by Dan Bollinger » Wed Jun 05, 2013 6:48 pm

I've noticed that water doesn't begin to flow immediately if the machine has been idle for a while, probably because the water has evaporated. I'm not in the habit of hitting the double-dose button while I'm grinding the first cup of the say so that when I pull that first shot the puck gets preinfused without delay.

Post Reply

Return to “Vivaldi Video Villa”