Adding Brew Pressure Gauge?

If you have a question or comment specific to the S1 that doesn't fit in any other S1 category, submit it here.
Post Reply
alsterling

Adding Brew Pressure Gauge?

Post by alsterling »

I would like to see how to add a brew pressure gauge to my Ver.1 machine...... Does anyone have instructions and photos, etc? I'm guessing that I would just "Tee" into the pressure side of the feed to the brew group?

Thanks, Al
User avatar
admin
Site Admin
Posts: 170
Joined: Wed Jun 02, 2004 11:48 pm
Location: Krakow

Post by admin »

I think the part below from Espresso Parts might be just the ticket for a retrofit without having to modify the hole in the front panel. It should connect right up to the current boiler connection, then you'd just need to figure out the optimum place to tap into the group boiler lines. I plan to take some photos of how LaSpaz did this in the VII and post them here in the next few days.

Image
S1 Cafe Admin
http://www.s1cafe.com
alsterling

Post by alsterling »

Chas.......thanks. I'll call both Espresso parts and Chris to see if they have any suggestions. It doesn't seem to be a very complicated issue, but I don't want to reinvent the wheel.

Best, Al
Post Reply

Return to “S1 General Q&A”